,

RECYCLASS RECYCLABILITY APPROVAL FOR MORCHEM PL 2727 AR + CF-740 R LAMINATING ADHESIVE

We are glad to announce that our innovative adhesive Morchem PL 2727 AR + CF-740 R laminating adhesive has earned the RecyClass Recyclability Approval.

Following independent standardised testing, Morchem PL 2727 AR + CF-740 R is fully compatible when used up to 4 wt% of the PE film.  This compatibility aligns seamlessly with the cutting-edge recycling processes for natural flexible PE in Europe.

Our trials, conducted in strict accordance with the Recyclability Evaluation Protocol for PE films, yielded impeccable results. There were no compromises in the quality of recyclable material during the processing of PE films.

This achievement marks a significant stride forward in our unwavering commitment to making meaningful contributions to sustainable packaging solutions.

,

MORCHEM – SECOND PHASE OF PHOTOVOLTAIC PROJECT COMPLETED

In line with MORCHEM’s sustainability strategy, 28% of our power consumption is now self generated through our second photovoltaic panel expansion thus contributing to reduce our environmental carbon footprint.

MORCHEM thus continues to reaffirm its commitment to the 2030 Agenda and the Sustainable Development Goals.

,

PRESS RELEASE

Morchem North American President to Present Latest Advances in Laminating Adhesives at PACK EXPO

Adhesive Innovations Improve Packaging Recyclability, Performance And Manufacturing Efficiency

Pleasant Prairie, WI – August 22, 2023 – MORCHEM, an innovative manufacturer of adhesives and coatings committed to the circular plastics economy, will present technologies at PACK EXPO Las Vegas which the company has developed to reduce material and energy usage in the laminating process. Morchem President Michael Reed will lead the educational session, titled “Laminate With Less,” on Tuesday, September 12, at 12 p.m. at the Processing Innovation Stage.

In this presentation, Morchem will highlight adhesive innovations that improve energy efficiency, reduce emissions and minimize post-production waste in flexible packaging. As a specialist in both solvent-free and solvent-based laminating adhesives, as well as functional coatings and ink binders, Morchem will demonstrate how new, higher performance adhesives and barrier coatings can reduce scrap during the production process and enhance monomaterial films to improve the recyclability of flexible packaging.

“The industry needs new, forward-thinking solutions to reduce the environmental impact of consumer packaging,” said Cristina Ventayol, Morchem Chief Commercial Officer.  “We have been working on some very exciting adhesive and coating innovations for high performance laminates, and we can’t wait to share our results with our colleagues in the U.S. at PACK EXPO.”

Achieving greater recyclability in flexible packaging has been a major hurdle for the packaging industry’s sustainability goals, in large part because of multimaterial structures that are too challenging for current recycling processes. Attendees of the presentation will learn how Morchem’s new barrier technologies improve the functionality and technical performance of monomaterial laminates to provide a clear path forward for fully recyclable packaging.

PACK EXPO visitors can also go to booth SU-7374 in the South Upper Hall to learn from Morchem experts how to save energy with fast-curing adhesives, reduce emissions with high-application solid content solutions and improve process efficiency with laminating solutions that eliminate bubble formation and visual defects.

“With the latest advancements in adhesive solutions and the monomaterial structures they support, the flexible packaging industry can set their sights on much improved recyclability,” Reed said. “But the key to achieving this quickly is collaboration along the value chain. We need to coordinate our development efforts to realize the full potential of adhesive innovation and monomaterial films that create fully recyclable structures with the high performance required of today’s packaging.”

Morchem’s educational session “Laminate With Less: Adhesives for Material & Energy Reduction” will be held at PACK EXPO on Tuesday, September 12 at 12 p.m. at the Processing Innovation Stage (N-10511) of the Las Vegas Convention Center. To learn more, visit Morchem at PACK EXPO at booth SU-7374 in the South Upper Hall, or visit www.packexpo.morchem.com.

About Morchem

 Morchem is an innovative manufacturer of adhesives and coatings for the flexible packaging industry. Focused on food safety and reducing waste at every step of the packaging process, Morchem collaborates with its customers to develop more sustainable, higher performance solutions for the most demanding packaging applications.

,

PROPAK 2023 – THE PREMIER PROCESSING & PACKAGING EXHIBITION OF ASIA

Bangkok, 14 – 17 June 2023

MORCHEM will be participating at PROPAK together with COMEXI, running lamination live demos with COMEXI solventless fast speed laminator SL2 Evolution using our innovative solvent free adhesive Morchem PL 2606 A + CF 60.

Lamination live demos twice a day: at 11:00 am and 3:00 pm – Don’t miss it!

You will be welcomed by our staff, who will inform you about our recent sustainable innovations for the flexible packaging industry.

Visit us at our stand AG45 in hall 101! We look forward to meeting you!

,

MORCHEM EXHIBITOR AT ITMA 2023 – MILAN, ITALY

8 – 14 June 2023

ITMA, the world’s largest international textile and garment technology exhibition, will take place again between 8th and 14th June at Fiera Milano, in Milan, Italy where the textile and garment community will gather to interchange their experiences, technological advancements and functional solutions.

After the successful participation at ITMA 2019 in Barcelona, MORCHEM will be exhibiting again, and we will be glad to invite you to visit our booth # B207 in Hall 5 where you will be welcomed by our staff, who will inform you about our current innovations and share with you the best tips of our knowledge vault about the novel Polyurethane Reactive Hot Melt Adhesives.

We hope to welcome you at our booth and invite you to be part of the integrated Textiles and Garment Manufacturing Value Chain.

,

MORCHEM: RISK ANALYSIS OF ENERGY SUPPLY SHORTAGE

We are in the middle of the first true global energy crisis. MORCHEM has evaluated the situation and the risks to which its 2 plants in Spain might be exposed.

Presently, Spain leads EU with most LNG regasification capacity accounting for 32% of the total EU capacity, and receiving liquefied pressurized gas (LPG) from different origins.

Spain’s gross electricity generation comes from renewable sources, followed by nuclear energy and finally gas with only 17,6%. Thus, the gas shortage has less impact on the electricity production in Spain than in the rest of the EU.

MORCHEM, included in the strategic sector during the COVID pandemic, would be given preference to receive energy supply, as it provides essential services for basic social functions.

Raw material supply: MORCHEM has a wide range of approved suppliers in different geographical areas, having sufficient alternatives to assure production in case of EU suppliers should fail due to energy shortages.

2022_MORCHEM Risk Analysis of gas and energy supply shortage.

2022_MORCHEM SUSTAINABILITY PLAN_Leaflet

,

MORCHEM – PHOTOVOLTAIC INSTALLATION

MORCHEM has completed the installation of 226 solar panels at its Fontanar plant, with the aim of achieving 123 kWp and an annual saving of 170,694 kWh/year, which translates into 10% self-generation.

Hereby, MORCHEM reaffirms its commitment to the 2030 Agenda and the Sustainable Development Goals.

,

MORCHEM MEMBER OF THE IQS COMPANIES FOUNDATION

Since July 2021 MORCHEM has been a new member of the IQS Companies Foundation of Barcelona, supporting with its donation the projects of IQS, which is dedicated to the promotion of university training, research and the relationship between IQS and the business world.
The institutional ceremony took place on 21 September and was attended by Helmut Schaeidt Murga, CEO of MORCHEM and Salvador Borrós, General Director of IQS, among others.

,

INTERVIEW WITH SALVADOR SERVERA, Global Chief Commercial Officer at MORCHEM

Salvador is heading the global department for client relations at MORCHEM. In the following interview he describes how he, together with his team, managed Covid successfully and what in his opinion the future in client relations may look like.

A very interesting prospective from an expert.

Topics:

1. How Corona changed client-relations at MORCHEM.

2. How MORCHEM dealt with the situation successfully.

3. The future of client-relations? Offline or Online?

4. Outlook – a personal prospective by Salvador Servera

Watch video at this link:

https://youtu.be/drZ99RRo_p0

,

OFFICIAL INAUGURATION OF THE NEW MORCHEM PLANT IN FONTANAR BY THE PRESIDENT OF THE REGIONAL GOVERNMENT OF CASTILLA LA MANCHA, MR EMILIANO GARCÍA-PAGE

FONTANAR (Guadalajara), 14th June 2021

On 14th June, the President of Castilla-La Mancha, Emiliano García-Page, inaugurated the new MORCHEM plant in Fontanar.

This event was initially scheduled for 16th March 2020, but had to be postponed due to the COVID-19 state of alarm situation.

The event was held with a reduced circle of people respecting the allowed capacity limits at the time and was attended by several authorities from Castilla la Mancha: In addition to the President of the regional government of Castilla-La Mancha, we were joined by Ms. Patricia Franco, Councillor of Economy, Business and Employment of the regional government of Castilla-La Mancha, Mr. José Luis Vega Pérez, President of the Provincial Council of Guadalajara and Mr. Víctor San Vidal, Mayor President of the City Council of Fontanar.

The new plant, built in a record time of 16 months on a 30,000 m2 plot, and after an investment of more than 25 million Euros, is focused on the manufacture of high volume polyurethane and polyester adhesives and is one of the most innovative factories in Europe, with fully automated facilities.

Despite the pandemic situation we decided to start up in April 2020. The good coordination and dedication of the teams of Fontanar and Las Franquesas allowed us to successfully start up the new plant little by little.

We would like to thank the regional government of Castilla La Mancha for all the support received for this project, as well as the City Council and the people of Fontanar for their warm welcome and hospitality.